ANSI A117.1-2003 PDF

ANSI A (), Standard for Accessible and Usable Buildings and Facilities as mandated by law and incorporated by reference by the States and. the laws that are enacted in the United States of America and in the states and cities contained therein. ±. «ANSI A (), Standard for Accessible and. Major changes/additions from ICC ANSI A – found in the edition of A 1. ICC ANSI. A – Section. ICC ANSI A –

Author: Samukora Naktilar
Country: Grenada
Language: English (Spanish)
Genre: Sex
Published (Last): 16 October 2014
Pages: 367
PDF File Size: 15.61 Mb
ePub File Size: 13.68 Mb
ISBN: 838-1-42555-678-2
Downloads: 40824
Price: Free* [*Free Regsitration Required]
Uploader: Mazuru

A seat shall be provided in an alternate roll-in-type shower anssi. Signals shall be visible from the floor area adjacent to the hall call button.

The clear floor space shall be 48 inches mm minimum in length and 30 inches mm ans in width. Hall signals, including in-car signals, shall comply with Section The telephone handset shall be capable of being placed flush on the surface of the shelf. Where elevator call but- tons or keypads are provided, they shall comply with Sections Door closers and door stops shall be per- mitted to be 78 inches 1 mm minimum above the floor. If text is multilined, braille shall a117.-12003 placed below entire text.

Tactile characters shall comply with Section Vision lites with the lowest part more than 66 inches mm above the floor are not required to comply with Section Automatic teller machines shall pro- vide the opportunity for the same degree of privacy of input and output available to all individuals.

Grab bars with a circular cross section shall have an outside diameter of 17 4 inch 32 mm minimum and 2 inches 51 mm maximum. Elevators complying with Section or The force for pushing or pulling open doors other than fire doors shall be as follows: Handrails shall have a cross section complying with Section For infor- mation onpermission to copy material exceeding a11.1-2003 use, please contact: Wheelchair accessible anssi telephones shall comply with Section The number Five key shall have a single raised dot.

  CAROL COLLINS CROMATOGRAFIA PDF

Water closets and toilet compart- ments primarily for children’s use shall be permit- ted to comply with Section Plumbing Elements and Facilities Fig. Where seats are provided, TTYs shall not be required to comply with Section Van parking spaces shall be inches mm minimum in width. Doors that do not extend to within 10 inches mm of the floor.

Call buttons shall have vis- ible signals to indicate when each call is regis- tered and when each call is answered. Visual characters indicating elevator car controls shall not be required to comply with Section Pedestrian signals are not required to comply with the requirement for choosing audible tones.

Openings in floor surfaces shall be of a size that does not permit the passage of a V 2 inch 13 mm diameter sphere, except as allowed in Sections Inside dimensions of elevator cars shall comply with Table Handrails shall extend beyond and in the same direction of stair flights and ramp runs in accordance with Section A standardized surface fea- ture built in or applied to floor surfaces to warn of hazards on a circulation path.

ICC/ANSI A – Accessible and Useable Buildings and Facilities

The clear- ance between the platform sill and the edge of any runway landing shall be 1V 4 inch 32 mm maxi- mum. Ramp handrails ansl extend horizon- tally above the landing 12 inches mm mini- mum beyond the top and bottom of ramp runs. Grab bars shall be installed in any manner that provides a gripping surface at the locations specified in this standard and a not obstruct the clear floor space.

Accessible toilet a17.1-2003 bathing rooms shall comply with Section The floor sur- face of the ramp run or ramp landing shall extend 12 inches mm minimum beyond the inside face of a railing complying with Section ansii Call buttons at elevator land- ings shall comply with Section Emergency con- trols, including the emergency alarm, shall be grouped at the a117.1-203 of the panel.

  DIETA GIOVANETTI PDF

Existing elevators shall not be required to comply with Section Each car shall be equipped with a self-leveling feature that will automatically bring arid maintain the car at landings within a tolerance of V 2 inch 13 mm under rated load- ing to zero loading conditions. Where space on an exist- ing car operating panel precludes tactile markings to the left of the control button, markings shall be placed as near to the control button as possible.

Plumbing Elements and Facilities mum in length shall be a1171-2003 on the control end wall at the front edge of the bathtub. Sides of ramp landings having a vertical drop-off of V 2 inch 13 mm maximum within 1 inches mm horizontally of the mini- mum landing area.

2003 ICC Accessible and Usable Buildings and Facilities

Where a permanent seat is provided at the head end of the bathtub, the clearance shall extend 12 inches mm minimum beyond the wall at the head end of the bathtub. Destination-ori- ented elevators shall provide car identification in tactile characters complying with Section The turning space shall be a T-shaped space within a inch 1 mm minimum square, with arms and base 36 inches 91 5 mm minimum in width.

A clear floor space complying with Section shall be provided at call controls. The uppercase letter “I” shall be used to determine the allowable height of all characters of the font.